Cabin Fever Challenge Targets

Make a Cabin Fever Challenge Target

Targets should print correctly when the printer is set to the selected size of paper. When printing be sure to select the corresponding paper size and avoid requesting the print be scaled or adjusted to fit the page.

Depending on your printer, the 203 mm and 209mm targets can be cut off on the sides, particularly on A4 paper. Since this just makes it harder, this is fine.

What Division do you want to shoot?
Division 1 - Vintage (Ideally shot at 100)
Division 2 - Modern/Open (Ideally shot at 100)
Division 3 - Manual/Open (Ideally shot at 100)
Division 4 - Single Shot (Ideally shot at 100)
Division 5 - Muzzleloaders (Ideally shot at 50)
Division 6 - 22 Rimfire (Ideally shot at 50)
Division 7 - Manual Classic Irons (Ideally shot at 100)

What paper size will you print it on?
A4 Letter Legal 11x17 A3 12x18 A2 A1 24x36 A0 36x48 48x48

Distance to shoot at Yards Metres

You should check the target prints at the correct width before shooting it.

If your target does not print correctly, you should try:

Ensuring that when your computer/device sent this to your printer, it was selecting the paper size corresponding to what you selected here, and was not requesting page scaling, or shrink/expand to fit the page.
Checking your printer's settings to ensure both the printer and the tray in the printer are set to the size of paper that you have selected here. Note that printers are infernal devices, and merely putting the correct size paper in them may not, as you might expect, do this for you.
Saving the generated target you get here to a file with the '.pdf' extension and then opening it on your computer to print it directly to your printer, instead of printing it from the web browser you are using right now.

If you would prefer the older targets we have traditionally used they are available by clicking here
After shooting, make your video available and then submit your score here